Share Report

Related Articles

the Nissan Ariya displayed in an almost golden color at Autopia 2099.

Previewing The Nissan Ariya

The Nissan 350Z Still Looks Right in Los Angeles

image of a blue Nissan Z

The 350 is very LAesque

From a simple front lip to a full widebody, the best Z33 street builds start with an honest look at where the car spends its time.

By The Editors

Wed, Nov 18, 2026 05:20 AM PST

Featured image: A 2007 Nissan 350Z in Twilight Blue Pearl, with the raised hood profile introduced that model year. Ethan Llamas / Wikimedia Commons · CC BY-SA 4.0

PROMOTIONAL PARTNERSHIP — The first road test for a modified Nissan 350Z in Los Angeles might be the entrance to a strip mall. There’s a dip at the gutter, a short climb to the parking lot and somebody in a crossover wondering why you’re taking the whole thing at an angle. If the front lip makes it through, you can get your coffee. If it doesn’t, you’ll spend the next ten minutes pushing a plastic clip back into a hole that used to be round.

That’s a very L.A. problem for a car that still makes a lot of sense here. The 350Z has the hips for a widebody, the roofline to carry a rear wing and enough character in factory form to look good with the right wheels and very little else. The trick is figuring out how much of that shape you want to change before you start ordering parts.

What a 350Z Body Kit Changes

On a Nissan 350Z, a body kit can mean a lip that attaches to the factory bumper or a set of panels that changes the car’s width. The Nissan 350Z body kits on this page give you a sense of the range, from individual bumper lips and side skirts to replacement bumpers and complete kits. Check the listed fitment against your model year, body style and the bumper that’s actually on the car. A Z that’s already been through a couple of owners may be wearing a front end from somebody else’s project.

A front lip brings the nose closer to the pavement. Side skirts can carry that lower line past the doors, which is worth thinking about before you buy a deep bumper that makes the rest of the car look like it’s sitting a foot higher. Walk around the Z and look at it in profile. The side view will tell you more about whether those pieces belong together than the low, head-on photo that sold you on the bumper.

Budget for a dry fit before paint. A body shop may have to adjust mounting holes, square up the gaps at the headlights or work out how the liners and undertray will attach. Ask what the estimate includes. A bumper that looks like a bargain in primer can turn into the most expensive part of the car by the time it’s straight and painted.

The Shape Nissan Got Right

The Z33 arrived in the U.S. for the 2003 model year with a 287-horsepower, 3.5-liter V6 and rear-wheel drive. A six-speed manual was available. For 2007, Nissan brought in the 306-horsepower VQ35HR and gave the hood a raised center section. The details changed, but walk up to either car from behind and it’s the same broad rear quarters and falling roofline doing most of the talking.

NISMO showed how far those proportions could go with Japan’s Fairlady Z S-tune GT. Its extended nose and tail and tall rear wing took cues from Nissan’s GT racing program. From the side, the longer ends make the whole car look like it’s reaching forward. It’s a good one to study if you’re tempted by a big rear wing. Look at what NISMO did to the rest of the car to give that wing some company.

image of a white Nissan Z350
The NISMO Fairlady Z S-tune GT stretches the Z33’s bodywork at both ends. Calreyn88 / Wikimedia Commons · CC BY-SA 4.0

Widebody Means Measuring Twice

The photograph that gets you interested in a widebody usually shows a parked car, with the wheels pointed straight and the tires tucked neatly under the flares. Your car will have to turn into a driveway, compress over a dip and do both at once. That’s where wheel width, offset and tire size earn their keep. Check the clearances at full steering lock and through suspension travel, with the wheel and tire combination you actually plan to run.

Rear overfenders deserve a conversation with the installer before anything gets cut. Some setups require trimming the original rear arches for tire clearance. Ask how the shop will finish and seal the exposed metal, and get a look at the inner arch on a car they’ve already done. You’ll see the outer panel every time you open the garage. It’s the work behind it that you’re paying a good shop to get right.

There’s plenty of room between factory bodywork and a saw blade. A set of wheels that sits well under the original quarters can bring out the Z’s shoulders, especially if the ride height leaves enough suspension travel to keep the tires clear. Try that side-on view again. You may already have the shape you wanted.

yellow Nissan Z350
Daijiro Inada’s Nissan 350Z at the 2006 Silver State Classic Challenge. NNH / Wikimedia Commons · CC BY 2.5

Set It Up for the Roads You Drive

A Saturday drive up Angeles Crest and an afternoon on the 405 ask different things of a car. Both will tell you when the suspension is too stiff for the pavement beneath it. On an older 350Z, start with the parts that determine how the car feels from the driver’s seat. Look at tire age and wear, check for tired dampers and worn bushings, and make sure the brakes are in good shape. Get an alignment after changing ride height and keep the printout. It makes a useful reference if the steering wheel starts sitting crooked or the inside edges of the tires wear faster than you expected.

If a track day is on the calendar, give the car a once-over with that in mind. Leave the radiator ducting in place when fitting a new bumper, or work out how to retain its function. Give yourself time to get a feel for the setup before adding more parts. A few sessions at Willow Springs will give you a better idea of what you want from the car than another evening of looking at photos.

Leave Yourself a Reason to Drive It

One of the pleasures of a Z is how little ceremony it takes to get going. Grab the keys, throw a jacket into the hatch and go. If the car has to come out of the garage on boards every time, that’s part of the ownership experience now. Some builders are happy with the trade. It’s worth knowing whether you’re one of them before the paint goes on.

The 350Z has worn enough looks over the years to make a case for almost any taste. Build the one you’d still take out on a Sunday when there’s no meet on the calendar. You’ll know you’ve got it right when the coffee gets cold because you took the long way home.

This article was compiled by the editors of LACar.

You Might Also Like These Articles:

porsche taycan at sunset with a camera crew

Taycan Turbo + Super Bowl = ?

leh-keen-porsche-taycan-in-garage

Porsche Taycan Breaks Indoor Speed Record

gymkhana car barely staying on dock while racing

Launch Control: Road to Gymkhana

BMW 2 front with signature BMW grille

BMW 2 Press Launch Lunch-Shoot

Elvis-singing-with-minis-in-background

MINI USA Looking for #MINILoveStories